Basic Information:
Name: DOIO HITPAD M Series
Firmware: GP2040-CE
Product Link: Here
Download Resources:
Manual: Link
Firmware Update: Link
You will need 'Magicboots' to make the device compatiable with PS4 and PS5
Instructions:
Default Keymap
Input mode
To select an input mode,
Press and hold one of the following buttons before connecting the device.
1P-PS3 /D-Input (RaspberryPi/Android)
1K-Nintendo Switch
2K-PC /X-Input (Windows/Steam)
2P-PS4 Mode
*PS4 and PS5 require Magicboots or other converters, Magicboots MUST be purchased separately.
Orientation Mode
SELECT+START+DOWN ARROW = Visual helmet mode(DP)
SELECT+START +LEFT ARROW = Left-analog stick
SELECT+ START+RIGHT ARROW = Right analog stick
SOCD Mode
HOME + START+DOWN ARROW = Neutral (up+down=middle, left+right=middle )
HOME + START+UP ARROW = SOCD1 (up+down=up, left+right = middle)
HOME+START+LEFT ARROW= Last input priority (post-override)
RGB Mode
SELECT+ START+1P = Next Animation
SELECT + START +1K = Previous Animation
SELECT+ START +2P = Brightness Up
SELECT+START+2K = Brightness Down
SELECT+ START +3P =Switch to Next Lighting Preset
SELECT+ START +3K = Switch to Previous Lighting Preset
SELECT+ START+4P = Next Key Triggers Light Color
SELECT+ START+4K = Previous Key Triggers Light Color
Rapid Fire Mode
Press and hold the TURBO button, then press the button you want to set for continuous shooting. Once set, you can cancel rapid fire by repeating the same action.
Rapid fire can be set for 1P, 2P, 3P, 4P, 1K, 2K, 3K, or 4K, across 8 buttons.
The firing rate can be adjusted within the range of 1 to 60 shots per second (individual button firing rate adjustment is not supported).
Hold the TURBO button and press the UP key to increase the firing rate, or hold the TURBO button and press the DOWN key to decrease it.
Even if the power is turned off, the set firing rate will be saved, but the rapid fire button status will be cleared.
Key Mapping
|
Keys/Modes |
XINPUT |
SWITCH |
PS3 |
DINPUT |
GP2040 |
|---|---|---|---|---|---|
|
1P |
X |
Y |
■ |
1 |
B3 |
|
2P |
Y |
X |
▲ |
4 |
B4 |
|
3P |
RB |
R |
R1 |
6 |
R1 |
|
4P |
LB |
L |
L1 |
5 |
L1 |
|
1K |
A |
B |
× |
2 |
B1 |
|
2K |
B |
A |
〇 |
3 |
B2 |
|
3K |
RT |
ZR |
R2 |
8 |
R2 |
|
4K |
LT |
ZL |
L2 |
7 |
L2 |
|
SELECT |
BACK |
- |
SELECT |
9 |
S1 |
|
START |
START |
+ |
START |
10 |
S2 |
|
LS |
LS |
LS |
L3 |
11 |
L3 |
|
RS |
RS |
RS |
R3 |
12 |
R3 |
|
HOME |
XBOX |
HOME |
13 |
A1 |
|
|
TP |
SCREENSHOT |
14 |
A2 |
Changing Key Values
We recommend prioritizing key remapping within the game. If the function cannot be achieved, please use the following features.
Press and hold the Start button before connecting the Type-C cable. Click http://192.168.7.1/ to access the debug page.
Click on "Configuration" and select "Pin Mapping."
Each pin corresponds to a specific key value. Such as changing the UP key to the L1 position, changing the L1 pin to 2 and the UP pin to 13. Save to apply.
Switching to PS5 Mode
Click on "Settings" and select "Input Mode" (choose PS4).
On the right side, select "Arcade Joystick" and click "Save."
Click on "Configuration" and select Add-Ons Configuration."
Enable "PS Direct Authentication" by selecting D+ as 26 and D- as 27 and click "Save."
Reconnect the Type-C cable, then connect the MagicBoots for PS5 use.
Note:To add a new user: Press the Home key, a page will appear, click "Add User"
Click on "Settings" and select "Input Mode" (choose Keyboard), then click "Save."
Click on "Configuration" and select "Keyboard Mapping."
Use the form below to reconfigure your button-to-key mapping, Then click ”Save“ button.
To activate the keyboard switch, reconnect the Type-C cable.
Configure Custom Lighting Theme
Click on "Configuration" and select "Custom LED Themes."
Click the "Enable" button, then set the colors for Normal and pressed lights by clicking the corresponding buttons.
Click "Save," then reconnect the Type-C cable to apply the changes.
Switching to PS4 Mode and Avoiding 8-Minute Timeout
Access the debug page, click the "Settings" at the top.
Under "Input Mode", select "PS4" from the dropdown，and select the "Controller" option on the right side, click “Save”.
Click on "Configuration" and select Add-Ons Configuration."
Find “PS4 Mode” and “Enable” it, Upload these 3 files it needs, then click “verify & Save”.
Slide to the bottom of the page, click “Save”, then reconnect to the PS4 console, the 8 minutes disconnected issue will be solved.
* Files are not provided.
Under "Input Mode", select "PS4" from the dropdown，and select the "Controller" option on the right side, click “Save”.
Click on "Configuration" and select Add-Ons Configuration."
Find “PS4 Mode” and “Enable” it, Upload these 3 files it needs, then click “verify & Save”.
Slide to the bottom of the page, click “Save”, then reconnect to the PS4 console, the 8 minutes disconnected issue will be solved.
* Files are not provided.
To add a new user: Press the Home key, a page will appear, click "Add User"
Note:
We do not provide support or assistance for system upgrades on disassembled units. Disassembly may result in device damage.
Version:
Uptade 2: May 10
