DOIO HITPAD Pro Series Instructions

May 21, 2024
DOIO HITPAD Pro Series Instructions
Published on  Updated on  

Basic Information:

Name: DOIO HITPAD P Series
Firmware: GP2040-CE
Product Link: Here

Download Resources:

Manual: Link
Firmware Update: Link
You will need 'Magicboots' to make the device compatiable with PS4 and PS5

Instructions:

Default Keymap

Mode Selection

Input mode

To select an input mode,
Press and hold one of the following buttons before connecting the device.
  1. 1P-PS3 /D-Input (RaspberryPi/Android)
  2. 1K-Nintendo Switch
  3. 2K-PC /X-Input (Windows/Steam)
  4. 2P-PS4 Mode
*PS4 and PS5 require Magicboots or other converters, Magicboots MUST be purchased separately.

Orientation Mode

  1. SELECT+START+DOWN ARROW = Visual helmet mode(DP)
  2. SELECT+START +LEFT ARROW = Left-analog stick
  3. SELECT+ START+RIGHT ARROW = Right analog stick

SOCD Mode

HOME + START+DOWN ARROW = Neutral (up+down=middle, left+right=middle )
HOME + START+UP ARROW = SOCD1 (up+down=up, left+right = middle)
HOME+START+LEFT ARROW= Last input priority (post-override)

RGB Mode

  1. SELECT+ START+1P = Next Animation
  2. SELECT + START +1K = Previous Animation
  3. SELECT+ START +2P = Brightness Up
  4. SELECT+START+2K = Brightness Down
  5. SELECT+ START +3P =Switch to Next Lighting Preset
  6. SELECT+ START +3K = Switch to Previous Lighting Preset
  7. SELECT+ START+4P = Next Key Triggers Light Color
  8. SELECT+ START+4K = Previous Key Triggers Light Color

Rapid Fire Mode

Press and hold the TURBO button, then press the button you want to set for continuous shooting. Holding the button will be recognized as rapid shooting. After set, you can cancel rapid fire by repeating the same action.
  1. Rapid fire can be set for 1P, 2P, 3P, 4P, 1K, 2K, 3K, or 4K, across 8 buttons.
  2. The firing rate can be adjusted within the range of 1 to 60 shots per second (individual button firing rate adjustment is not supported).
  3. Hold the TURBO button and press the UP key to increase the firing rate, or hold the TURBO button and press the DOWN key to decrease it.
  4. Even if the power is turned off, the set firing rate will be saved, but the rapid fire button status will be cleared.

key Mapping

Keys/Modes
XINPUT
SWITCH
PS3
DINPUT
GP2040
1P
X
Y
1
B3
2P
Y
X
4
B4
3P
RB
R
R1
6
R1
4P
LB
L
L1
5
L1
1K
A
B
×
2
B1
2K
B
A
3
B2
3K
RT
ZR
R2
8
R2
4K
LT
ZL
L2
7
L2
SELECT
BACK
-
SELECT
9
S1
START
START
+
START
10
S2
LS
LS
LS
L3
11
L3
RS
RS
RS
R3
12
R3
HOME
XBOX
HOME
13
A1
TP
SCREENSHOT
14
A2

Changing Key Values

We recommend prioritizing key remapping within the game. If the function cannot be achieved, please use the following features.
  1. Press and hold the Start button before connecting the Type-C cable. Click http://192.168.7.1/ to access the debug page.
  2. Click on "Configuration" and select "Pin Mapping."
  3. Each pin corresponds to a specific key value. Such as changing the UP key to the L1 position, Setting PIN 02 to "L1" and PIN 13 to "UP.". Save to apply.
  4. Save up to 4 different key value sets under "Profile 1~4" at the top. To set a specific set of key values, click the "Map buttons with switch" , select it and click the "Save" button.“ ”
Note: Only the 0.7.7 version supports saving four sets of key values.

Pin Number

Switching to PS5 Mode

  1. Access the debug page, click the "Settings" at the top.In the "Input Mode" tab, select "PS4" from the dropdown menu. On the right, select "Arcade Stick" and click "Save."
  2. Click on "Configuration" and select "Peripheral mapping" . Enable "USB Host" function, change "D+" to "26." and click "Save."
  3. Click on "Configuration" and select "Add-Ons Configuration."
  4. Enable "PS Direct Authentication" and Unenable "PS4 Mode" , click "Save".
  5. In the top right corner of the webpage, switch to PS4 mode, then click "Reboot - Controller".
Note:To add a new user: Press the Home key, a page will appear, click "Add User"

Switching Keyboard Mode

  1. Access the debug page, click the "Settings" at the top.In the "Input Mode" tab, select "Keyboard" from the dropdown menu,Switch to "GP2040" in the top right corner of the webpage,then click "Save."
  2. Click on "Configuration" and select "Keyboard Mapping."
  3. After clicking the "Save" button, then reconnect the Type-C cable to apply the changes.

Configure Custom Lighting Theme

  1. Click on "Configuration" and select "Custom LED Themes."
  2. Click the "Enable" button, then set the colors for Normal and Pressed lights by clicking the corresponding buttons.
  3. Click "Save," then reconnect the Type-C cable to apply the changes.

Switching to PS4 Mode and Avoiding 8-Minute Timeout

  1. Access the debug page, click the "Settings" at the top. In the "Input Mode" tab, select "PS4" from the dropdown menu. On the right, select "Controller" and click "Save."
  2. Click on "Configuration" and select “Add-Ons Configuration".
  3. Find “PS4 Mode” and “Enable it, Upload these 3 files it needs, then click “verify & Save”.
  4. In the top right corner of the webpage, switch to PS4 mode, then click "Reboot - Controller".
* Files are not provided directly.
To add a new user: Press the Home key, a page will appear, click "Add User"

Note:

We do not provide support or assistance for system upgrades on disassembled units. Disassembly may result in device damage.

Published on  Updated on